Monthly Archives: April 2016

Why Hiring An Electrician Is Always A Must!

I came across an article a few years ago called “Have You Seen This? Why you should hire an electrician” and it peaked my interest so I shared on our blog then, but I felt we should re-visit since its a cute video.
 
“Thanks to Pinterest and HGTV we all think we’re expert DIY pros when it comes to our homes. Quite often we go into our projects with the confidence of a lion only to finish and feel as sheepish as, well, a lowly sheep. You should see the wood floors in my house. Let’s just say the elevation change in my living room is enough to give you altitude sickness. What all this is leading to is the fact that hiring a professional is sometimes the best choice, as this husband and wife duo found out.
 
This couple decided to make some upgrades to their bathroom, which included some lighting upgrades. While the husband did his absolute best to make sure to put the wiring back exactly as he found it, he found out that electricians go to school for a reason. Go ahead and watch the insanity ensue for yourself, but there is another commentary to be made here besides the merits of hiring a professional. That is the fact that wives consistently find their husbands hilarious and often for all the wrong reasons. As a husband myself, there have been oh so many times that my wife has laughed this hard at my “mistakes.” Anyway, give the video a gander and get a good chuckle as we all learn two valuable lessons: that sometimes we should trust in a professional and that wives will always laugh at husbands’ missteps in the most loving way possible.”

 
— John Clyde, KSL w/ DailyAmerican.com
 

Entire Article Here
 
 
 
 

Smoke Alarms – Think Fire Prevention

Most fire deaths are preventable. Protect yourself and your family by:
Purchase one or more smoke alarms.
Install your alarms properly.
Identify escape routes and practice escaping.
Maintain your alarms.

 

How many should I have in my house?
There should be a least one smoke alarm on every level of your household. Additional alarms will significantly increase your chances of survival
 
Where should I install my smoke alarms?
Follow the manufacturer’s guidance on the recommended location of smoke alarms in a house. Most smoke alarms should be placed on the ceiling or high on a wall near the bedrooms. This enables the alarm to sense the smoke as it approaches the sleeping area. Install your smoke alarm away from air outlet vents to prevent dust accumulation.
 
Know How to Escape
Your smoke alarm will awaken you, but you may not be thinking clearly. You should practice escaping before an emergency strikes. Once a fire has started, it spreads rapidly. You may have only seconds to get out. Normal exits from bedrooms may be blocked by smoke or fire. It is important everyone knows exactly what to do.
 
Identify Escape Routes
Plan two exits from every room. Second story windows may need a rope or chain ladder to enable occupants to escape safely. Choose a meeting place outside the home so you’ll know everyone has escaped. Practice your escape!
 
Maintenance is Important
Your smoke alarm must be maintained properly to provide you and your family with protection.
 
How do I maintain my smoke alarms?
Replace batteries according to the manufacturer’s instructions. Remember to change batteries when you change your clocks!
Dust the grill of your alarm.
Test your alarm monthly or according to the manufacturer’s instructions.

 
Smoke Alarm Program
CFD partners with many community organizations to provide and install Smoke Alarms to residents upon request. To find out more about this program call the smoke alarm hotline at 704-336-2697, complete the Smoke Alarm Request Form or email firesafety@charlottenc.gov
 
 
http://charmeck.org/city/charlotte/fire/divisions/fireandlifesafety/pages/smoke%20alarms.aspx

DIY Electrical Wiring: Scary Reasons Not to Try This at Home

Electricians share horror stories of wiring projects gone wrong!
 
Before you embark on that DIY wiring project you’re considering, ask yourself it that’s really how you want to die.
 
“When homeowners start messing around with electrical circuits and running cables, there are two likely outcomes, and both are lethal: electrical shock and fire,” says veteran do-it-yourselfer Joe Truini in Today’s Homeowner magazine. He goes on to recount seeing an unsettling photo from an Illinois home inspector of one DIY project: A wall switch mounted inside a shower. “It’s a wonder no one was fried,” Truini concludes.
 
It shouldn’t come as a shock that you should hire a certified electrician when you need wiring repairs. Electricians are trained to do the job without electrocuting themselves or leaving a potential fire hazard lurking in your walls.
 
Think you’re smart enough to do your own wiring? Take a peek at some of the problems electricians say they routinely encounter when a do-it-yourselfer tries to do it himself.
 
Electrical tape: The duct tape of wiring DIYers
In Lexington, Kentucky, electrician Nick Maxey encounters a lot of black electrical tape wrapped around do-it-yourselfer wiring jobs when he’s called to fix a problem. This has been going on for the 15 years he’s owned Threewire Electric. It’s such a common problem that Maxey wonders if people really believe electrical tape is a safe solution for home wiring. It isn’t.
 
“I’ve seen a lot of handyman jobs where a lot of electrical tape was used where it shouldn’t be,” Maxey says. “Twisting wires together and using lots of tape to hold them. This often leads to bad connections that can become potential fire hazards. Any type of loose or failed connection typically generates heat.”

 
Getting your “wires” crossed
Bob owns Express Electrical Service in Raleigh, North Carolina. In his 30 years in business, one of the most unusual things he’s seen was a homeowner’s telephone wire snafu. “This guy had all his switches and outlets wired with telephone wire,” Wagner says. “That wasn’t good.” This may win the award for understatement, as Wagner went on to explain that the gauge of telephone wire is too small — only half of what’s needed — to handle the standard 120 volts needed for a home in the United States. The regular flow of current can overheat the wire, melt the insulation and cause a home fire.
 
Ceiling Fan Fails
Although installing a ceiling fan might seem simple enough, Wagner has had many frantic calls from homeowners who tried this DIY project. “We hear from them when the fan comes crashing down on the dining room table, or it’s dangling by the wires from the ceiling,” he says.
 
Would that pass inspection?
”More often, we’ll have people turning an attic into a bonus room and they do all the wiring themselves, but never get it inspected,” says Wagner. “Then when they go to sell the house, they don’t have the proper wiring, the proper fixtures. One job we just did, it cost the homeowner $7,000 to redo a room because he didn’t hire an electrician. Worse case, you have to tear out all the drywall and replace the wiring from scratch.”
 
Attic hazards and hidden junction boxes
Greg Green is the owner of Davis & Green Electrical in Richmond, Virginia. “We see a lot of problems with single-strand conductors run in an attic” — a dangerous shock hazard — “when the appropriate wiring method would be metallic sheath cable,” he says. “A lot of times we see floating junction boxes with no support,” Green adds. “Any wiring that rubs on the box can wear it out and make a spark. We see a lot of homeowners who cover up junction boxes. Then when there’s a problem, you’ve got a mystery box and can’t find it.”
 
Forgetting the GFI (a “shocking” mistake)
Dangerous mistakes typically stem from a lack of knowledge, Green says. “So many times we’ll see a homeowner who put an outlet outside. You would think most of the population would be educated enough to know that an outdoor outlet needs a ground-fault interrupter button that will trip the outlet if there’s any water” — the lack of which may cause your home to burn to the ground. When a little knowledge is a costly, dangerous thing
 
Phillip Solomon, a San Diego electrician with 32 years of experience, says it’s almost always less expensive to call an electrician first than pay to have him fix what somebody else worked on. Homeowners “get in over their head or can’t make sense of the wiring, or they’ll get something apart and can’t get it back together. If there are multiple colored wires, they run into trouble; they start tripping the breakers and things aren’t working. We hear from people who say they went on the Internet or watched a video to learn how to do something, but it didn’t turn out quite right.”
 
The benefits of hiring an electrician include getting a written warranty on the work. Most licensed electricians are also bonded and insured for any problems that might arise later. “From a permitting standpoint, if the work was done without a permit, there’s no mortgage company that’s going to write a loan on a house with an addition that’s never had an inspection,” Green says.
 
 
 
 
http://www.safebee.com/home/diy-electrical-wiring-scary-reasons-not-try-this-home

If You Had An Electrical Hazard, Would You Want To Know?

April 2016 CurrentSAFE
If your home had an electrical hazard, would you want to know? CurrentSAFE is the most comprehensive diagnosis of your homes electrical system! ARC Electric Company’s specially trained We can locate concealed electrical problems by providing this revolutionary electrical testing on residential properties without having to dismantle, damage or cut into any parts of the home. Why CurrentSAFE®? * Greatly reduce the risk of electrical fire * Identify and eliminate shock hazards * State-of-the-art electronic testing equipment * Non-destructive testing. If lighting strikes, we can help! * 1 out of every 200 homes are struck by lightning every year * A bolt of lightning can reach temperatures of 50,000 degrees. If you believe your home may have been struck, CurrentSAFE® Electrical Hazard Detection can assess any hidden damage to your electrical system. Insurance Claims Every insurance agent and adjuster wants to satisfy their customers by settling claims quickly while providing them with the settlement they are entitled to. CurrentSAFE® works closely with insurance companies to make that happen.

2016 National Electrical Safety Month is almost here!

May is National Electrical Safety Month!
 
Throughout the month of May, ARC Electric Company will be giving you great tips about electrical safety. May is a good time to also review your electrical safety procedures at your home and business!
 
Top electrical hazards the result of the growing use of electrical power, combined with electrical systems that are over 20 years old. Wiring hazards are both a major cause of electrocutions and home fires, killing hundreds and injuring thousands each year. Misuse of surge suppressors, power strips and extension cords is also a cause of electrocutions and fires. Contact with power lines and major appliances contribute to hundreds of deaths annually, both at home and in the workplace. Eliminating these electrical hazards will help reduce deaths and injuries.
 
safetymay2014
Home Safety, Electrical Safety, Charlotte Electrical Contractor, Charlotte Electrician, Electrician in Charlotte, Electrician in Charlotte NC, Electrical Contractor in Charlotte, Electrical Contractor in Charlotte NC, Matthews Electrical Contractor, Matthews Electrician, Electrician in Matthews, Electrician in Matthews NC, Monroe Electrical Contractor, Monroe Electrician, Electrician in Monroe, Electrician in Monroe NC, Indian Trail Electrical Contractor, Indian Trail Electrician